DIY hydroponics
Pre-assembled drip irrigation system, consisting of an 8 l / h dripper, a Idrop manifold, 50cm 3x5mm microtube and dripping stick for the capillary distribution of the nutrient solution.
DIY hydroponics
Adjustable 360° dripper spit whit variable flow from 0 to 40l/h , suitable for irrigation and the distrubution of the nutrient solution.
DIY hydroponics
Barbed fitting 16mm whit 1/2" inch male thread, made for flexible PVC hose 16mm and whit all the 1/2"" threaded fitting.
Components RDCW 2.0
Barbed fitting 16mm whit 1/2" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.
Components RDCW 2.0
Elbow 90° barbed fitting 16mm whit 3/4" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.
DIY hydroponics
Elbow 90° barbed fitting 16mm whit 3/4" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.
DIY hydroponics
Tee barbed fitting 16mm whit 3/4" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.
DIY hydroponics
Connector fitting in polypropylene, whit 3 x 16mm barbed way out and 3/4" male threaded fitting.
DIY hydroponics
Connector fitting in polypropylene, whit 3 x 16mm barbed way out and 1" female threaded fitting.
DIY hydroponics
Connector fitting in polypropylene, whit 4 x 16mm barbed way out and 1" female threaded fitting.
DIY hydroponics
Connector fitting in polypropylene, whit 6 x 16mm barbed way out and 1" female threaded fitting.
DIY hydroponics
Barbed adaptor fitting for 12mm hose and threaded female whit swivel nut 1/2"
