Hydroponic Systems RDWC 4.1S
Number of pots: 4 +1
N1 Air pump: Hailea ACO9610 600 L/h
N1 Water pump: Grech 500 l/h
Single pot’s size: 33h x 30d x 19 liters
Distance between pots: 45 cm (System water volume: 60 liters)
System size: 80 x 80 cm
Grow area: 1m x 1,8m
n.1 controller pot
n.4 growing pot
n.9 water proof 32mm rubber gasket
n.1 16mm rubber gasket
n.4 net pots 12mm
n.1 16mm Delivery Hose + Valve
n.1 TEE + VALVE PVC 32mm
n.1 tee fitting PVC 32mm
n.2 connecting pipe PVC 32mm
n.4 air stone
n.5 meters air pipes
n.1 air pump Hailea ACO 9610 ( 600 l/h)
n.1 water pump 500 l/h
What does DWC mean?
Deep water culture is one of the most simple and efficient hydroponic growing technique, the plant grows in a net pot filled with a small quantity of expanded clay peables.
The roots develop immersed in a water-based mineral solution constantly oxygenated by an air pump.
Hydroponic Systems RDWC 4.1 S
The controller pot constantly allow the solution to circulate through the 4 growing pots by a water pump ( 500 l/h), in this way EC and pH will be balanced throughout the pots.
The air pump (600l/h) connected to the air stones will increase the roots’ oxygen level speeding up growth and increasing the harvest.
The system default measures are are 80×80 cm but you can shrink it to 70×70 simply sliding the pipes inside the growing pots.
We recommend to use it in grow box from 0.8 to 1,2 square meter.
The growing pots are connected each other by 32mm PVC pipes, this promote the water flow through the system and avoid any kind of obstruction by roots.
The new growing pots are made in black plastic inside and white outside, this allow to prevent the nutrient solution from light hitting and keep it free from algae.
In the same time the white cover will reflect the light and heat in order to keep the water cool and an high ratio of dissolved oxygen
Growrilla hydroponics RDWC system are made in non – toxic food grade plastic, to ensure the safety of your crops.
EASE OF USE
This system is produced by grower for grower, designing it we looked for to make it simple, efficient and especially comfortable for working.
You can assemble it in 5 minutes and it’s completely tools free.
Through the front tap you will be able to take samples of solution and measure EC an pH.
As well as emptying the system to replace the solution.