DIY Hydroponics

1,20

Polyethylene pipe 12mm diameter, 1 meter lenght, for drip irrigation

3,60

20mm PVC flexible double-layer irrigation hose that helps protect the nutrient solution from overheating caused by sunlight or light from cultivation lamps.

1,50

Pre-assembled drip irrigation system, consisting of an 8 l / h dripper, a Idrop manifold, 50cm 3x5mm microtube and dripping stick for the capillary distribution of the nutrient solution.

10,90

Adaptor fitting made whit 32mm PVC pipe, threade 3/4" whit valve and barbed fitting 16mm.

0,59

Adjustable 360° dripper spit whit variable flow from 0 to 40l/h , suitable for irrigation and the distrubution of the nutrient solution.

0,70

Barbed fitting 16mm whit 1/2" inch male thread, made for flexible PVC hose 16mm and whit all the 1/2"" threaded fitting.

0,80

Barbed fitting 16mm whit 1/2" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.

0,60

Elbow 90° barbed fitting 16mm whit 3/4" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.

0,70

Elbow 90° barbed fitting 16mm whit 3/4" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.

1,40

Tee barbed fitting 16mm whit 3/4" inch male thread, made for flexible PVC hose 16mm and whit all the 3/4" threaded fitting.

2,60

Connector fitting in polypropylene, whit 3 x 16mm barbed way out and 3/4" male threaded fitting.

2,80

Connector fitting in polypropylene, whit 3 x 16mm barbed way out and 1" female threaded fitting.